Disclaimer

  1. Product stability is subject to standard terms and conditions mentioned below.
  2. The situations shown in Merino TV commercials showcase usage under normal domestic conditions only.
  3. Merino laminates are tested as per applicable IS 2046:2005 standard in the presence of quality experts.
  4. NSF International has certified Merino Industries Limited Hapur for Work Surface in CGS and HGS grade. For further product listing information visit www.nsf.org/certified-products-systems.
  5. The impact applied on the laminate as shown in TV Commercials is as per Impact resistance test of IS 2046:2005 standard.
  6. The gloss retention shown in TV Commercials is as per the respective test mentioned in ASTM D-6037 standard.
  7. Merino does not claim any special feature in Merino Laminates beyond the above-mentioned standard.
  8. The colours and appearance of original products may vary due to various external factors.
  9. All general warranty conditions are also applicable to the products shown in Merino TV Commercials. Please refer to the warranty page for further details on the general warranty.
  10. The anti-Bacterial claim is as per lab Test Reports available.
  11. Currently, Merino does not offer Anti-microbial properties for the designs in our “Metalam” and “Mirror” products range.
  12. Customer shall use only the prescribed sanitization process for santization. The prescribed process is as under:
    • – Sanitization Process for Laminate surface – The surface can be cleaned with soap solution for 25-30 sec or sanitize by any alcohol having concentration >75%, after cleaning /sanitizing surface should be wiped off properly by clean soft cloth and make the surface full dry. (As per WHO’s direction, contact with any soap for more than 25 sec or contact with alcohol >75% purity will sanitize the surface). This cleaning can be done as and when required. After cleaning with alcohol, it should be wiped off with soft water so that traces of alcohol or soap will not remain on the surface.
    • – Sanitization Process for Meister surface (Coated – Gloss Meister, Matt Meister, Ply Meister) – As this surface is Acrylic and PU coated, we need to sanitize the surface with soap solution for 25-30 sec and wipe the surface till it is fully dry. As alcohol based sanitizer mostly have Iso Propyl Alcohol (IPA) in it, this may have whitish effect on coating surface. If at all alcohol need to be used, then only Methyl alcohol should be used for sanitizing. After cleaning, surface need to be wiped by soft clean cloth and make it fully dry.
  13. Addition conditions for different products range are as under: –
    • – Special Laminates – Luvih Surfaces– Tough whitish oily stains on the Luvih surfaces should be cleaned first with warm water and soap. Dry the surface and then clean with Melamine Foam to make the surface fully cleaned.
    • – Matt Meister– Matt Meister does not have self-cleaning properties. Marks left by sweat, oily or dirty fingers must be cleaned with a soft damp cloth and little dish soap. In case of stronger marks, wipe with Melamine foam. Entire MERINOLAM range can be offered in Meister series based on minimum order quantity. There is minor colour variation seen in coated products as compared to same colour laminates or edge bands. Customers are advised to reconfirm from samples before placing order.
    • – Gloss Meister and Ply Meister–Entire MERINOLAM range can be offered in Meister series based on prescribed minimum order quantity. There is minor colour variation seen in coated products as compared to same colour laminates or edge bands. Customers are advised to reconfirm from samples before placing order.
    • – Unicolour Laminates– Unicolour range should not be used with Plywood as a substrate. Use of MDF or Particleboard is recommended. Do not paste Unicolor more than 2ft in width as the sheet expands more in width than in length.
    • – Coordinated Surfaces Harmony– Entire MERINOLAM range can be offered in Coordinated Surfaces Harmony based on prescribed minimum order quantity. Customers are advised to reconfirm from samples before placing order.
    • – Infusio –Rubbing the surface forcefully during the cleaning process can damage the glitters and should be avoided. Do not flood the laminate or allow water to stay on the surface as water can penetrate and damage the laminate. Always clean using a soft microfiber cloth and follow a gentle cleaning process.
  14. Stoven– Physical product colour and pattern may slightly vary from its digital interpretation. We recommend you asking for samples before ordering the same.
  15. The availability of products may vary from one region to another. Kindly reach out to your local representative to know the availability of the products.

 

Quick Query

Please fill in the details.

I agree that by clicking the 'Submit' button, I am explicitly soliciting a call and message via WhatsApp or any other medium from Merino Industries Ltd or its partners.
Quick query